Right Seal, Replacing: Installing

WARNING: This page is about a different variant/trim than selected.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lightly oil new seal on outer circumference.

-- Fill the space between the sealing and dust lip -arrow- halfway with Sealing Grease :G 052 128 A1 .

-- Install the seal all the way in without tilting it.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the flange shaft -A- toward the transmission and secure.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the right drive axle to the transmission flange shaft -A-. Refer to DRIVE AXLE .

-- Install the heat shield over the right drive axle, if removed. Refer to DRIVE AXLE .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Check the transmission fluid level. Refer to TRANSMISSION FLUID LEVEL, CHECKING .

-- Install the noise insulation. Refer to NOISE INSULATION .