Differential, Disassembling And Assembling: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Press Plate :VW402
- Press Piece - Rod :VW408A
- Press Piece - Multiple Use :VW412
- Press Piece - 60mm :VW415A
- Press Piece - Multiple Use :40-105
- Press Piece - Multiple Use :3005
- Press Piece - Bushing :3259
- Press Piece - Reverse Gear Syncro :3296
- Bearing Installer - Wheel Bearing :3345
- Puller - Taper Roller Bearing :VAG1582
- Puller - Taper Roller Bearing - Adapter 6A :VAG1582/6A
- -1- Puller - Kukko Internal - 46-56mm :Kukko 21/7
- -2- Puller - Kukko Puller - 60-150mm Width, 200mm Length :Kukko 18/1
- -3- Puller - Kukko Quick Action Separating Tool - 12-75mm :Kukko 17/1
- -4- Puller - Kukko Counterstay :Kukko 22/2
- Inductive Heater :VAS6414