LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Final Drive & Differential System (Service Information - Manual Transmission - 02Q, 02QA)) >> 39 Final Drive, Differential >> Differential >> Differential, Disassembling And Assembling >> Installing The Spring Pin

Installing The Spring Pin

WARNING: This page is about a different variant/trim than selected.
GWWA39-10601Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Align the hole in the differential bevel gear axle to the hole in the differential housing.

-- Using a drift, install the adapter sleeve -1- to the dimension -a- = 2.5 ± 0.5 mm.

scientia non olet · About LEMON Manuals