LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 49 (Final Drive & Rear Final Drive System (Service Information - 5-Speed Manual Transmission - 0AF)) >> 39 Final Drive And Rear Final Drive >> Differential >> Differential, Disassembling And Assembling >> Removing The Spring Pin

Removing The Spring Pin

WARNING: This page is about a different variant/trim than selected.
GWWA39-10600Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Use a 5 mm diameter drift -B- to remove the adapter sleeve -A- from the hole -arrow- on the differential housing.

NOTE:

If there is no hole -arrow- in the differential housing, then sheer off the adapter sleeve Spring Pin Without Surrounding Groove .