Automatic Glow Time Control Module -J179-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different variant/trim than selected.
Arrow -
Automatic Glow Time Control Module -J179-
The glow plug system is activated via an Automatic Glow Time Control Module -J179-. The Automatic Glow Time Control Module -J179- is OBD capable.
If there is a malfunction in the glow plug system, a DTC memory entry will be stored in the engine control module.
Checking the glow plug system is explained in the "Guided Fault Finding" .
Electronically controlled glow plugs with a separate glow plug control module were installed in order to reach a quick starting function.
Each glow plug is activated and diagnosed separately.