Mounting Bracket, Removing And Installing: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Hose Clamps - Up To 25 mm :3094
- Torque Wrench 1331 5-50Nm :VAG1331
- Hose Clip Pliers :VAS6362
- Sealing Tool :T10249
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Nuts - Clutch pedal mounting bracket
- Seal - Between mounting bracket and bulk head