Clutch Master Cylinder, Removing And Installing: Installing

• Move the clutch pedal into its rest position.

-- Attach the mount -2- to the clutch master cylinder actuator rod -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Place a spacer -A- between the clutch pedal and the stop and push the clutch pedal down as far as the spacer.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Spacer length = approximately 40 mm (for example ¹ /₂ socket insert)

-- Lock the clutch master cylinder to the bracket in direction of -arrow 1- and -arrow 2-.

-- Push the clutch master cylinder actuator rod -1- in direction of -arrow- until the mount -2- audibly engages inside the clutch pedal.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the bracket.

• Left-hand drive vehicles. Refer to MOUNTING BRACKET, REMOVING AND INSTALLING