Oil Pump, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
NOTE:
Replace the seal after removal.
Replace the bolts that were tightened with an additional turn after removing them.
-- If no alignment sleeves -arrows- present in the oil pump, insert them.
Vehicles With Two-Piece Oil Pan
-- Install the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .
-- Install the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .
Vehicles With One-Piece Oil Pan
-- Install the oil pan. Refer to OIL PAN, REMOVING AND INSTALLING .
Continuation For All Vehicles