Clutch Engaging Mechanism, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The dual clutch is removed. Refer to DSG .

-- Remove the large engaging lever with the small engaging bearing.

NOTE:

The guide sleeve upper section cannot be removed or installed separately. It is always removed and installed together with the guide sleeve lower section and the small engaging lever.

-- Remove the bolts and the small engaging lever with the guide sleeve upper and lower sections.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Replace the ball stud -2- only if it is worn down. Refer to CLUTCH ENGAGING MECHANISM, ADJUSTING .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

WARNING:

The hinge -1- cannot be removed.