Centering Clutch Plate

WARNING: This page is about a different variant/trim than selected.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Ignore arrows -A- and -B-.

Continuation For All

When Installing, Tighten Bolts as Follows So Pressure Plate Does Not Distort (Causing Shuddering On Acceleration):

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Make sure the stop pin (position sensor) -arrow- moves easily.

-- Install the pressure plate on the centering pins.

-- Install all bolts evenly, by hand, until the bolt heads touch the pressure plate.

-- Tighten the bolt diagonally in small steps.

-- Install the transmission. Refer to TRANSMISSION, INSTALLING .