Gear Ratio Calculation
WARNING: This page is about a different variant/trim than selected.
Example:
| 7th Gear | Final drive | |
|---|---|---|
| Drive gear | ZG1 = 49 | ZA1 = 17 |
| Driven gear | ZG2 = 32 | ZA2 = 71 |
| i = Z2
: Z1
(Z1
= number of teeth on the drive gear, Z2
= number of teeth on the driven gear) iG = gear ratio = ZG2 : ZG1 = 32 : 49 = 0.653 iA = axle ratio = ZA2 : ZA1 = 71 : 17 = 4.176 itotal = total ratio= iG x iA = 0.653 x 4.176 = 2.730 |
||