High Pressure Reservoir (Rail), Removing And Installing: Removing

-- Remove the high pressure line between the high pressure reservoir (rail) and the high pressure pump. Refer to HIGH PRESSURE LINE BETWEEN HIGH PRESSURE RESERVOIR (RAIL) AND HIGH PRESSURE PUMP, REMOVING .

-- Free up the fuel return hose -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Open the hose clamps -arrows- and unclip and remove the wiring duct -2-.

-- Disconnect the connectors:

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 - For the Fuel Pressure Sensor -G247-

3 - For the Fuel Pressure Regulator Valve -N276-

-- Loosen the clamp -4- and remove the fuel return hose.

-- Remove the high pressure lines union nuts -2-.

-- Remove the high pressure lines and lay on a clean cloth.

-- Remove the bolts -arrows- and remove the high pressure reservoir.