LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Turbocharger System (Service Information - 2.0L - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA)) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING >> Removing

Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

GWWA21-10784Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Spray the hose on the Charge Air Pressure Sensor -G31- with solvent before disconnecting.

CAUTION:

There is a risk of damaging the charge air pressure sensor by breaking the connection.

  • Remove the hose carefully and evenly from the connection.

-- Remove the bolts -2- and the Charge Air Pressure Sensor -G31-.