Overview - Fuel Delivery Unit/Fuel Level Sensor: Notes
WARNING: This page is about a different variant/trim than selected.
- Locking Ring
- 110 Nm
- Supply Line
- Black
- Attached to the side of the fuel tank
- Make sure it is secure
- Return Line
- Blue
- Attached to the side of the fuel tank
- Make sure it is secure
- Flange
- For the fuel delivery unit
- Note installation position of flange on fuel tank. Refer to first figure under Installed Position Of Flange On Fuel Tank
- Fuel Level Sensor -G-
- Removing and installing. Refer to Fuel Level Sensor -G-, REMOVING AND INSTALLING .
- Fuel Delivery Unit
- Removing and installing. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .
- With Transfer Fuel Pump -G6-
- Fuel pump, checking. Refer to Transfer Fuel Pump -G6-, CHECKING .
- Seal
- Replacing
- Install the dry seal into the opening in the fuel tank
- Moisten with fuel only when installing flange