Version 1
Right and left connector coupling with release buttons -arrows- :
Opening
The fuel coupling point -1- in the engine compartment must be counterheld.
-- Insert the Lever - Fuel Line :T10468 between the heat shield and the fuel line stop -arrow- -2- and counterhold it.
Continue for all Coupling Points on the Fuel System
-- Push the connector coupling -1- in direction of -arrow A-.
-- Press the release button and hold it down.
-- Disconnect the connector coupling -1- from the fuel line -2- in the direction of -arrow B-.
Follow the color coding when installing. Refer to CONNECTOR COUPLINGS, SEPARATING - Connector Coupling Allocation .
The connector couplings must >>audibly<< engage when locking.
-- Pull on the connector coupling to make sure it is secure.