Transmission, Removing: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Engine Support Bridge :10-222A
- Transmission Support :3282
- Engine and Gearbox Jack :VAS6931
- Tensioning Strap :T10038
- Engine Support - Basic Set :T40091
- Engine Support - Supplement Kit :T40093A
- Slide Hammer Set - Adapter 40 : VW771/40 from the Slide Hammer Set : VW771
- Hose Clamps - Up To 25 mm :3094
- Transmission Support - Pins 29 :3282/29
- Transmission Support - Mounting Plate 33 :3282/33
- Transmission Support Elements (determine when mounting the Adjustment Plate on the Transmission Support)
- Grease for Clutch Disc Shaft Splines :G 000 100
- For the correct grease. Refer to the Parts information.
- M10 x 20 bolt