Clutch Housing, Servicing

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A - Counter Support, for example :Kukko 22/1

B - Puller - Kukko Internal - 14-19mm, for example :Kukko 21/2

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A - Counter Support, for example, Puller - Kukko Counterstay :Kukko 22/2

B - Puller - Kukko Internal - 20-30mm, for example :Kukko 21/4

NOTE:

The needle sleeve will get damaged when it is removed and must be replaced.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lay the reverse shaft thrust washer -B- on the needle sleeve while pressing it in.