LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Crankshaft & Cylinder Block (General & Service Information - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA)) >> 13 Crankshaft, Cylinder Block >> Pistons And Connecting Rod >> Overview - Pistons And Connecting Rod >> Tightening Specification For Oil Spray Jet And Relief Valve

Tightening Specification For Oil Spray Jet And Relief Valve

WARNING: This page is about a different variant/trim than selected.
GWWA13-0687Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Bolt with Pressure Relief Valve
  2. Piston Cooling Oil Spray Jet
Bolts Tightening Specification
Bolt with Pressure Relief Valve 27 Nm
CAUTION:

Risk of damaging the oil spray jets.

  • Do not bend the oil spray jets.
  • Check the oil spray jet clearance after reinstalling the pins.
  • Bent oil spray jets must be replaced.
scientia non olet · About LEMON Manuals