Sub-Assembly Bracket, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the generator. Refer to GENERATOR .

-- Remove the high pressure pump. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING .

-- Unclip the coolant hose from the top of the engine and free it up.

-- Unclip the bracket -1- with the fuel hoses.

-- Remove the bolts -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -arrow- and remove the damper roller.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the bolts in the order -6 to 1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts and remove the sub-assembly bracket.