LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Crankshaft & Cylinder Block (General & Service Information - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Overview - Belt Pulley Side Sealing Flange >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different variant/trim than selected.
Fig 1: Belt Pulley Side Sealing Flange Tightening Specifications
GWWA13-10948Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts in the steps shown in the sequence:

Step Bolts Tightening Specification
1 -1 through 10- Install by hand all the way
2 -1 to 6- Diagonally in stages to 13 Nm
3 -7 through 10- 13 Nm