Transmission, Removing: Notes

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Bits for VAG1331/13 :T10099
Socket - Xzn 14:T10061
Engine/Gearbox Support Shackle (2 pc.) :10-222A/12
Shop Crane :VAS6100

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.

Mandatory Replacement Parts

O-ring - Line to Mechatronic
Bolts - Transmission Bracket
Bolts - Cable bracket

-- The transmission and engine are removed. Refer to ENGINE, REMOVING AND INSTALLING [For engine(s) CZTA] or ENGINE, REMOVING AND INSTALLING [For engine(s) CBPA] or ENGINE, REMOVING AND INSTALLING [For engine(s) CNLA] or ENGINE, REMOVING AND INSTALLING [For engine(s) CVCA or ENGINE, REMOVING AND INSTALLING [For engine(s) CPPA, CPRA, CPKA, CPLA] .