LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Controls & Housing System (Service Information - Direct Shift Gearbox - 0CG)) >> 34 Controls, Housing >> Selector Mechanism >> Selector Lever Handle, Removing And Installing >> Removing

Selector Lever Handle, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.
GWWN37-10463Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The handle and selector lever cover are removed.

-- Move the selector lever into "D".

-- Turn off the ignition.

-- Unclip the cover on both sides using Trim Removal Wedge :3409  and remove it.

-- Remove the connector from the selector lever cover.

-- Push the sleeve upward in direction of -arrow- to unlock the handle.

-- Pull the selector lever handle and cover upward without pressing the button.

Fig 1: View Of Disengaging Knob
GWWN34-10550Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals