Emergency Release From P: Procedure
WARNING: This page is about a different variant/trim than selected.
-- Unclip the selector lever cover and move it to the side.
-- Press the brake or set the parking brake.
-- Push onto the yellow plastic part in direction of -arrow-.
CAUTION:
The selector mechanism could get damaged.
- The selector mechanism must be replaced completely if any of its components are damaged.
- The solenoid releases the selector lever.
-- When the solenoid is free, press the button in the selector lever handle and move the selector lever out of "P".
NOTE:
If the selector lever is not switched back into "P", the solenoid for the shift block will be automatically blocked in the position "P". The solenoid must be released again.