LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Gears & Shafts System (Service Information - Direct Shift Gearbox - 0CG)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft 1, Disassembling And Assembling >> Output Shaft 1, Completely Disassembling >> Removing The Output Shaft 1 Bearing

Removing The Output Shaft 1 Bearing

WARNING: This page is about a different variant/trim than selected.
GWWN35-10347Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- First destroy the bearing cage.

-- Remove the bearing inner race.

GWWN35-10348Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.