LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine System (Cylinder Head & VALVETRAIN System - Service Information - 1.8L; 2.0L TFSI - CPLA, CPPA, CPKA, CPRA)) >> 15 Cylinder Head, VALVETRAIN >> Intake And Exhaust Valves >> Valve Guides, Checking >> Wear Limit

Wear Limit

WARNING: This page is about a different variant/trim than selected.
Intake Valve Guide Exhaust Valve Guide
0.80 mm 0.80 mm
NOTE:

If the wear limit is exceeded, measure using new valves. Replace the cylinder head if the wear limit is still exceeded.

If the valve was replaced during a repair, a new valve must be used to measure.

scientia non olet · About LEMON Manuals