LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine System (Cylinder Head & VALVETRAIN System - Service Information - 1.8L; 2.0L TFSI - CPLA, CPPA, CPKA, CPRA)) >> 15 Cylinder Head, VALVETRAIN >> Intake And Exhaust Valves >> Valve Guides, Checking >> Test Sequence

Test Sequence

WARNING: This page is about a different variant/trim than selected.
GWWN15-10914Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the valve into guide. The valve stem end must be flush with the guide. Due to differences in valve stem diameter, make sure that only intake valves are used to check intake valve guides, and only exhaust valves are used to check exhaust valve guides.

-- Determine the tilting clearance.

scientia non olet · About LEMON Manuals