Tightening Specifications

WARNING: This page is about a different variant/trim than selected.

Fig 1: Camshaft Housing Tightening Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Tighten with a new bolts as follows:

Step	Bolts	Tightening Specification/Additional Turn
1.	-1 through 3-	Install hand-tight
2.	-1 through 3-	8 Nm
3.	-1 through 3-	180° additional turn

Fig 2: Oil Separator Tightening Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.