LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine System (Cylinder Head & VALVETRAIN System - Service Information - 1.8L; 2.0L TFSI - CPLA, CPPA, CPKA, CPRA)) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Overview - Camshaft Timing Chains >> Bearing Bracket without Adapter Sleeve and Aluminum Bolts

Bearing Bracket without Adapter Sleeve and Aluminum Bolts

WARNING: This page is about a different variant/trim than selected.
Step Bolt Tightening Specification/Additional Turn for Aluminum Bolts
1. -1 to 6- 4 Nm
2. -1 to 6- 180°
scientia non olet · About LEMON Manuals