LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine System (Cylinder Head & VALVETRAIN System - Service Information - 1.8L; 2.0L TFSI - CPLA, CPPA, CPKA, CPRA)) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Overview - Camshaft Timing Chains >> Bearing Bracket With And Without Adapter Sleeve

Bearing Bracket With And Without Adapter Sleeve

WARNING: This page is about a different variant/trim than selected.
GWWN15-11326Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

If a new bearing bracket -3- with adapter sleeve -4- should be installed, it must be checked before installing the bearing bracket in the hole -arrow- in the cylinder head -1-.

If the hole -arrow- is not designed for using the adapter sleeve -4- the adapter sleeve must be removed from the bearing bracket.

scientia non olet · About LEMON Manuals