LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Gears & Shafts System (Service Information - Manual Transmission - 02Q, 02QA)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> Output Shaft, 5TH, 6TH And Reverse Gears, Disassembling And Assembling >> Removing Tapered Roller Bearing

Removing Tapered Roller Bearing

WARNING: This page is about a different variant/trim than selected.
GWWN35-0269Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A - Counter Support, for example, Puller - Kukko Counterstay :Kukko 22/2  .

B - Internal Puller 46 to 58 mm, for example, Puller - Kukko Internal - 46-56mm :Kukko 21/7  .

NOTE:

Check the washer for damage after removing it and replace if necessary.

scientia non olet · About LEMON Manuals