LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Gears & Shafts System (Service Information - Manual Transmission - 02Q, 02QA)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> Output Shaft, 5TH, 6TH And Reverse Gears, Disassembling And Assembling >> Installing Reverse Gear Synchro-Hub

Installing Reverse Gear Synchro-Hub

WARNING: This page is about a different variant/trim than selected.
GWWN35-0263Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the locking ring.

-- Mount the reverse gear locking collar on the reverse gear synchronizer hub.

-- Install the reverse gear wheel and the needle bearing.

scientia non olet · About LEMON Manuals