LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Gears & Shafts System (Service Information - Manual Transmission - 02Q, 02QA)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> Output Shaft, 1ST To 4TH Gears, Disassembling And Assembling >> Remove Collar Bushing With 1ST Gear Wheel

Remove Collar Bushing With 1ST Gear Wheel

WARNING: This page is about a different variant/trim than selected.
GWWA35-10492Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Allocate transmission via code letters:

A - Puller - Quick Action Separating Tool - 22-115mm, for example :Kukko 17/2  .

-- Install the Separating Tool -A- underneath the helical-cut gear teeth on the 1st gear wheel.

scientia non olet · About LEMON Manuals