LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Gears & Shafts System (Service Information - Manual Transmission - 02Q, 02QA)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> Output Shaft, 1ST To 4TH Gears, Disassembling And Assembling >> Installing Outer Race/Tapered Roller Bearing Into Clutch Housing

Installing Outer Race/Tapered Roller Bearing Into Clutch Housing

WARNING: This page is about a different variant/trim than selected.
GWWN35-0251Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Support the clutch housing with the Bearing Installer - Multiple Use :40-20  directly under the bearing mount.

scientia non olet · About LEMON Manuals