LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Gears & Shafts System (Service Information - Manual Transmission - 02Q, 02QA)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> Output Shaft, 1ST To 4TH Gears, Disassembling And Assembling >> Installing Inner Race/Tapered Roller Bearing

Installing Inner Race/Tapered Roller Bearing

WARNING: This page is about a different variant/trim than selected.
GWWN35-0246Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.


GWWN35-0249Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Choose the correct locking ring. Refer to the figure below and install.

scientia non olet · About LEMON Manuals