LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Gears & Shafts System (Service Information - Manual Transmission - 02Q, 02QA)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> Output Shaft, 1ST To 4TH Gears, Disassembling And Assembling >> Determining Circlip

Determining Circlip

WARNING: This page is about a different variant/trim than selected.
GWWN35-0235Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Choose and install the thickest locking ring that will fit.

NOTE:

Allocate the circlips.

The following locking rings are available:

Thickness (mm)
1.79 1.83 1.86 1.89
1.92 1.95 1.98 -