LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Gears & Shafts System (Service Information - Manual Transmission - 02Q, 02QA)) >> 35 Gears, Shafts >> Input Shaft >> Input Shaft, Disassembling And Assembling >> Installing Cylindrical Roller Bearing Into Clutch Housing

Installing Cylindrical Roller Bearing Into Clutch Housing

WARNING: This page is about a different variant/trim than selected.
GWWN35-10007Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Compress the cylindrical roller bearing locking ring -arrow- with pliers -C- and install it.

-- Remove the pliers before the cylindrical roller bearing gets into its installed position. The locking ring must lock into the groove on the clutch housing.

scientia non olet · About LEMON Manuals