Vibration Damper, Removing And Installing: Notes

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Counterhold - Vibration Damper :T10355
Vibration Damper Assembly Tool :T10531

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.

Mandatory Replacement Parts

Bolt and O-ring - Vibration damper
Bolts - Lower timing chain cover

NOTE:

The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.