LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine System (Crankshaft & Cylinder Block - Service Information - CPLA, CPPA, CPKA, CPRA)) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Crankshaft Dimensions

Crankshaft Dimensions

WARNING: This page is about a different variant/trim than selected.

(Dimensions in mm)

Reconditioning Dimension (1) Crankshaft Bearing Pin Diameter Connecting Rod Bearing Pin Diameter
Standard dimension 58.00 47.80
(1) The preparation of worn crankshafts is not possible at this time.
scientia non olet · About LEMON Manuals