Oil Pump, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

-- Make sure there are both alignment bushings for centering the oil pump.

-- Check the oil intake pipe screen and the oil channels in the oil pan upper section for contamination before installing the oil pump.

-- Guide the oil pump chain sprocket into the drive chain and install the oil pump.

-- Pull the chain tensioner spring with the :T10118 in the direction of -arrow- and remove the :T40265 .

-- Slowly release the :T10118 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Place the O-ring -item on the new oil baffle and coat with engine oil. Refer to -item ) O-ring-.

-- Insert the new oil baffle and secure it.

-- Install the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .

-- Fill the engine oil and check the oil level.