Oil Pan Lower Section, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the noise insulation. Refer to NOISE INSULATION .

-- Oil Level Thermal Sensor -G266-, Removing. Refer to Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING .

-- Remove the bolts -1 through 20-.

Fig 1: Lower Oil Pan Bolt Tightening Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully loosen the oil pan lower section from the bond.

-- Remove the bolt -1- and remove the oil baffle -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.