Engine Oil Cooler, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
CAUTION:
The cooling system is under pressure when the engine is warm. Risk of scalding due to hot steam and hot coolant.
Scalding the skin and other parts of the body is possible.
- Wear safety gloves.
- Wear protective eyewear.
- Reduce the pressure by covering the coolant expansion tank cap with a cloth and carefully opening it.
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the sub-assembly bracket. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
-- Remove the bolts -4 and 5- and remove the engine oil cooler -3- together with the seal -2-.