LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Lubrication System (Service Information - 1.8L & 2.0L TFSI - CPLA, CPPA, CPKA, CPRA)) >> 17 Lubrication >> Crankcase Ventilation >> Oil Separator, Removing And Installing >> Removing

Oil Separator, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove ignition coil cylinders "3 and 4". Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .

-- Loosen the hose clamp -1- and remove the hose from EVAP Canister Purge Regulator Valve 1 -N80-.

GWWA17-10827Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove bolt -2- and then remove crankcase ventilation hose -3- from oil separator.

-- Remove the bolts -arrows- and the oil separator.

scientia non olet · About LEMON Manuals