Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the noise insulation. Refer to NOISE INSULATION . .

-- Remove the bolts -1- from the top.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the connector -2- from the bracket -3- and disconnect it.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -2- and the fan shroud -4- downward.

-- Disconnect the connector -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2- and the Engine Speed Sensor -G28-.