Reducing Agent Injector -N474-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different variant/trim than selected.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install in reverse order of removal and note the following:

NOTE:

Replace the seal.

Secure all hose connections with standard production hose clamps.

Installation position: the tabs in the Reducing Agent Injector -N474- -2- must be inserted in the corresponding mounts in the exhaust pipe -1- -arrows-.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Adapt the adaptation value for the SCR system after draining reducing agent or replacing components. Refer to SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEM ADAPTATION VALUE, ADAPTING .