Overview - Reducing Agent Injector: Notes

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Reducing Agent Injector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Reducing Agent Injector -N474-
- Removing and installing. Refer to Reducing Agent Injector -N474-, REMOVING AND INSTALLING .
Clamp
Coolant Line
- Connection Diagram. Refer to CONNECTION DIAGRAM - COOLANT HOSES .
Coolant Line
- Connection Diagram. Refer to CONNECTION DIAGRAM - COOLANT HOSES .
Emissions Control Module
- Overview. Refer to OVERVIEW - EMISSIONS CONTROL SYSTEM .
- Removing and installing. Refer to EMISSIONS CONTROL MODULE, REMOVING AND INSTALLING .
Bolt
- Tightening specification. Refer to Versions Of Screw Type Clamps .
- Replace after removing.
Screw-Type Clamp
- Replace after removing.
- Versions. Refer to Versions Of Screw Type Clamps .
Rubber Ring
Seal
- Replace after removing.