Rear Muffler, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
Remove the left rear underbody trim panel. Refer to UNDERBODY TRIM PANEL .
-- If necessary disconnect the muffler. Refer to EXHAUST PIPES/MUFFLERS, DISCONNECTING .
-- Remove the rear tunnel brace. Refer to UNDERBODY TRIM PANEL .
-- Loosen the clamping sleeve -2- and push it toward the rear.
WARNING:
Risk of accident due to the weight of the rear muffler.
- A second technician is required to remove the rear muffler.
-- Disengage the rear muffler -10- from the mount -11-.
-- Remove the bolts -9 and 12- and remove the rear muffler -10-.