LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Exhaust System & Emission Controls System (Service Information - CPLA, CPPA, CPKA, CPRA)) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Exhaust System, Installing Without Tension >> Procedure >> Tail Pipes, Aligning

Tail Pipes, Aligning

WARNING: This page is about a different variant/trim than selected.

-- Align the rear muffler so that the space -a and b- between the opening for the bumper and the tail pipes is the same.

GWWV26-0959Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the rear muffler suspended mount to align the tail pipes.

-- Install the clamping sleeve. Refer to CLAMPING SLEEVE INSTALLATION POSITION .

scientia non olet · About LEMON Manuals