LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Ignition & Glow Plug System (Service Information - CZCA, CZDA, CZTA)) >> 28 Ignition/Glow Plug System >> Ignition System >> Engine Speed Sensor -G28-, REMOVING AND INSTALLING >> Installing

Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Insert the Engine Speed Sensor -G28- carefully into the hole.

This prevents the Engine Speed Sensor -G28- from falling between the engine and transmission.

-- Install in reverse order of removal.

-- Install the noise insulation. Refer to NOISE INSULATION . .

scientia non olet · About LEMON Manuals