Upper Section Of Oil Pan - Tightening Sequence
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Replace the bolts that were tightened with an additional turn.
-- Tighten the bolts in the steps shown in the sequence:
| Step | Component | Tightening Specification/Additional Turn |
|---|---|---|
| 1 | Bolts -1 to 19- | Install by hand all the way |
| 2 | Bolts -arrows- | Install by hand all the way |
| 3 | Bolts -1 to 19- | 8 Nm |
| 4 | Bolts -1 to 19- | 90° additional turn |
| 5 | Bolts -arrows- | Tightening specification. Refer to TRANSMISSION, REMOVING AND INSTALLING (02Q, 02QA) , TRANSMISSION, REMOVING AND INSTALLING (0CG) and TRANSMISSION, REMOVING AND INSTALLING (0AF) . |