Oil Pan Lower Section, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Wedge Set - Wedge 2 :T10383/2
- Applicator Gun :VAS6966
- Cutting Tool :T10561
- Flat-Blade Scraper
- Commercially Available Scraper
- Sealant Remover
- Hand Drill with Plastic Brush Attachment
- Protective Eyewear
- Sealant.
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Oil pan lower section
- Seal - Oil level thermal sensor
- Bolt
- Washer
- Bracket
- Knife
- Guide
- Handle
- Insert for the mount to move the handle
- Bolt
- Mount